Buy now, pay later with Shop Pay for Orders $50 and over

SMATRUL Smart Home Wireless Touch Light Switch Electrical 433MHZ RF Relay Remote Control Glass Screen Wall Receiver Led Lamp

SMATRUL Smart Home Wireless Touch Light Switch Electrical 433MHZ RF Relay Remote Control Glass Screen Wall Receiver Led Lamp

Vendor
MerchMixer
Regular price
$38.99
Sale price
$25.99
Unit price
per 
Shipping calculated at checkout.

Our advantage: 1. The remote control + wireless switch are used together, more convenient and more reasonable 2. Pass CE, ROHS certification: 3. Night fluorescent function, multiple combinations (free pairing signal), remote remote control 4.After the power is turned off, turn it on again. Keep closed 5. When the signal is paired for the second time, there is no need to climb the stairs to pair the signal 6.Highly sensitive design, Drawer box design, Luminous fluorescent strip, Drop resistance design, Large panel, etc. N remote control+8 Controller It is more convenient to control multiple devices from different places The remote control + wireless switch are used together, Remote control can turn off multiple devices at once The wireless switch is placed in multiple places, which can be more convenient Avoid Darkness and Save Energy Turn the lights on in advance to avoid darkness. Turn off the lights after leaving, save energy 20~100M LONG RANGE (in Open area) Tip: The obstacle will shorten the distance, the wireless signal is affected by the environment, the more obstacles, the shorter the distance. More Assured And Safer After the power is turned off, turn it on again. Keep closed Working principle Input and output intermediate access controller. Wireless switch control current is turned off and on at 433 MHz Easy Installation Take out from the bracket when using, it is not easy to lose Remote Control Parameters Senderfrequenz: 433,92 MHz Coding method: Learning Code EV 1527 Item Size(Each): Approx. 9.4 *4.5 * 1.65cm (L*W*H) Item Weight(Each): Approx. 20g / 0.7oz Remote control battery:12V 23A battery( Does not contain battery ) A number key controls A device It is clear that the corresponding equipment will not be confused Controller parameter Size: 80 * 40 * 25MM Working frequency: 433MHZ Maximum current:: <10A Voltage: AC100 ~ 240V 50 / 60HZ Controller installation 1.When installing, please turn off the power 2.If the N and L wires of the input terminal are installed oppositely, the lamp will be slightly bright or flickering. 3.If the input and output terminals are installed in opposite directions, the receiver may become unstable or inoperable. Maximum current: 10A / each controller For Example: Voltage = 220V, Power = <2000W; Voltage = 110V, Power = <1100W Wireless switch parameters: Size: 86 * 86 * 10MM Working frequency: 433MHZ Battery: CR2032 battery (excluding battery) Distance: 100M (in open area) Luminous fluorescent strip Middle of the night, do not worry about finding the switch Drawer box design Cr2032 Battery , easy to replace the battery The service life is about 12 months. Life and frequency of use are related. Time may be longer (Does not contain battery) Drop resistance design Protective housing,four-corner arc transition, buffer protection HD Tempered Glass Highly sensitive design, can be touched by wet hands Place Anywhere Screw + double-sided adhesive installation How to pair signals Method 1: 1.Press and hold the learning key for 3 seconds until the indicator light stays on (Controller) 2.TOUCH the wireless switch 1 times 3.Indicator light (Controller )flashes twice 4.Pairing signal succeeded note: Entering the learning code mode will last about 10 seconds. If there is no operation, it will automatically exit the learning code mode. Method 2: No need to climb stairs to pair signals 1.touch quickly the (1) wireless switch 4 times 2.touch the (2) wireless switch 6 times 3.Pairing signal succeeded note: 1.Prerequisite: Before operating this step, there must be a pairing signal between the remote control and the controller How to clear the signal 1.Press and hold the learning key for 10 seconds about ,until the indicator light Flashes quickly (Controller) 2.All signals will be cleared note: 1. professional electrician should operate this product. When powering on, do not touch the antenna. Install this product without opening the protective cover 2.This controller will not be available if a wall switch with RF function is installed at home. Otherwise the function will be affected. Just need to buy a separate wireless switch 3. Do not operate with power. Turn off the power supply and operate it. If the test is confirmed to be correct, use it under the guidance of a professional electrician. 4. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient). 5. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work normally. 6. Do not use this electronic product abnormally. Abnormal use will reduce product performance and longevity. In severe cases, damage to the product will also pose a safety hazard.